HP J9407B#ABA | Power Over Ethernet Injector

Here are 12 technical specifications for the HP Power Over Ethernet Injector:

1. Input voltage: 100-240 VAC, 50/60 Hz
2. Output voltage: 48 VDC, 0.38 A
3. Power consumption: 18.3 W maximum
4. Ethernet data rates: 10/100/1000 Mbps
5. Ethernet ports: 1 RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
6. PoE standards: IEEE 802.3af, IEEE 802.3at
7. PoE output power: 15.4 W per port (IEEE 802.3af), 30 W per port (IEEE 802.3at)
8. PoE output voltage: 48 VDC
9. PoE output current: 0.32 A per port (IEEE 802.3af), 0.62 A per port (IEEE 802.3at)
10. Operating temperature range: 0°C to 40°C (32°F to 104°F)
11. Operating humidity range: 5% to 95%, non-condensing
12. Dimensions (W x D x H): 3.74 x 2.2 x 1.38 in (95 x 56 x 35 mm)

Helpful notes:
1. This PoE injector can power up to 2 devices simultaneously.
2. It is compatible with a wide range of HP networking products.
3. The compact size of the injector makes it ideal for use in small spaces or cramped network closets.