Dell T8HYN | M8428-K Converged 10Gb/s Network Switch for PowerEdge M1000e

Here are 12 technical specifications for the Dell M8428-K Converged Network Switch:

1. Switching capacity: 960 Gbps
2. Forwarding rate: 714.2 Mpps
3. Port configuration: 20 internal 10GbE ports and 8 external 10GbE ports
4. Supported protocols: Fibre Channel, iSCSI, FCoE, Ethernet
5. VLAN support: Yes
6. Quality of Service (QoS) support: Yes
7. Jumbo frame support: Yes
8. Management interface: CLI, SNMP, Telnet, SSH, Web GUI
9. Power consumption: 280W maximum
10. Rack mountable: Yes, in PowerEdge M1000e chassis
11. Redundancy features: Hot-swappable power supplies and fans, redundant management modules
12. Operating temperature range: 0°C to 40°C

Helpful notes:
1. The Dell M8428-K switch is designed for use in the PowerEdge M1000e blade enclosure.
2. The switch supports converged networking, allowing Fibre Channel, iSCSI, and Ethernet traffic to run over the same physical infrastructure.
3. The switch is compatible with Dell's OpenManage Network Manager software for centralized management and monitoring.